亚州一区二区三区中文字幕国产精品-日韩人妻一区二区三区蜜桃视频-亚洲中文字幕久久无码精品-午夜精品亚洲一区二区三区嫩草-日韩人妻一区二区三区蜜桃视频-国产一区二区精品高清在线观看-国产欧美日韩综合精品一区二区

The low minimum detection limit and wide measurement range of the Hach 9184 sc Amperometric Free Chlorine Sensor makes it ideal for efficient residual chlorine monitoring. Continuously measures hypochlorous acid (HOCl), temperature, and pH.

• Low Minimum Detection Limit for Efficient Residual Chlorine Monitoring
• Wide Measurement Range
• Continuous Chlorine Measurement
• Compatible with Hach's "Plug and Play" Digital Controllers
• Integral temperature sensor provides more accurate readings

  Low Minimum Detection Limit for Efficient Residual Chlorine Monitoring

  The Hach 9184 sc sensor has a minimum detection limit of 5 ppb or 0.005 mg/L hypochlorous acid in the form of HOCl.

  Wide Measurement Range

  The 9184 sc sensor is particularly useful for drinking water distribution monitoring, chlorination applications, demineralizer systems, wastewater, or cooling water processes due to its 0 to 20 ppm measurement range.

  Continuous Chlorine Measurement

  Measurements are made continuously by the sensor and reported to the controller

  Compatible with Hach's "Plug and Play" Digital Controllers

  The 9184sc Analyzer is designed to be used with all Hach sc digital controllers. Set up is fast and easy, and the system is compatible with the full line of Hach digital sensors.

  Integral temperature sensor provides more accurate readings

  What's in the box

  Hach 9184sc Chlorine sensor panel without pH sensor, 4 spare membranes, and Manual.

  Specifications

  Accuracy:2 % or ±10 ppb TFC, whichever is greater at pH <7.5

  Accuracy 2:2 % or ±10 ppb HOCl, whichever is greater at pH <8

  Calibration Interval:2 months

  Calibration Method:Zero Calibration: electrically (automatic) or with de-chlorinated water Calibration: Comparison of lab method with process sample pH Calibration: Single- or two-point using standards or comparison of lab method with process sample

  Enclosure Rating:NEMA 4X/IP66

  Flow:0.25 L/h (200 to 250 mL/min) auto-regulated by flow thru cell

  Interferences:No interference from chloramines. Chlorine dioxide and ozone interfere with measurement.

  Length:10.6 in ( 270 mm )

  Lower Limit of Detection (LOD):0.005 mg/L HOCl

  Maintenance Interval:6 months Measurement Cell: for membrane and electrolyte, typical

  Maintenance Interval 2:1 1.5 pH Cell: typical

  Measuring Interval:Continuous

  Measuring Principle:Amperometric/Membrane (electrode, membrane, electrolyte)

  Mounting:Flat, vertical surface (panel, stand, etc.)

  Operating Temperature Range:0 to 45 °C

  pH Range:4 to 8 acidification unit available for pH greater than 8

  Pressure Limit:0.1 to 2 bar in flow cell (1.4-28 PSI)

  Range:0 20 mg/L as hypochlorous acid (HOCl)

  Relative Humidity:0 to 90 % non-condensing

  Response Time:90 % in less than 90 seconds

  Sample Input:0.25 " outer diameter

  Sample Output:0.5 " inner diameter

  Sample Temperature:2 to 45 °C (35.6-113 F)

  Storage Conditions:-20 °C to 60 °C

  Temperature Compensation:Automatic over sample temperature range

  Warranty:2 years

  Weight:14.33 lbs. (6.5 kg) 14.3 lbs