Manufacturer:HP

 Refurbished by:Allwin21 Corp

There are 20 sets of  refurbished HP 4062 in stock,please refer the inventory information 

The HP4062UX Semiconductor Process Control System is the high-end system of the HP4062 Semiconductor Parametric Test System family. The HP4062UX satisfies all of the requirements of the Integrated Circuit Manufacturers for both process monitoringprocess development. Since the HP4062UX uses the same mea­surement hardware as the HP4062C, it maintains the same highly accuratereliable measurement capabilities as the HP4062C, such as high-speed measurements over a wide measurement range. For example, a typical connect-connect-force-measure sequence （resistance） measurement takes less than 17 ms,measurements can range from 20 fA to lA4 μV to 200V.
In addition to the sophisticated hardware of the HP4062C, the HP4062UX provides powerful software capabilities with the HP BASIC/UX operating environment. HP BASIC/UX combines the most powerful instrument control language. HP BASIC, with all the elements of HP-UX, the Hewlett-Packard implementation of the AT&T System V UNIX＊ operating system. HP Interactive Mea­surementAnalysis （IMA） Software makes measurements inter­actively by providing a softpanel user interface.

HP4062UX Process Control System Key Features:

• High-speedwide measurement range
• Standard networking
• Interactive MeasurementAnalysis Software
• Multiusermultitasking
• Multiwindowing
• Offline debugger

HP4062UX Process Control System Specification：

• Measurement functions:
  I, V, I- V, C•G - V, C•G- t, Pulse I/V, Pulse I-V, Analog Search

• Switching matrix – Number of pins （to I DUT）:
  12 pins to 48 pins （48-pin matrix）
  24 pins to 96 pins （96-pin matrix）

• Number of ports （to instrument）: 9 ports （optionally 17） High-resolution source/monitor unit: 1 port
  
  High-power source/ monitor unit: 1 port
  Source/monitor units: 2 ports
  Ground unit: 1 port optionally 10
  Auxiliary: 4 ports

• Maximum voltage at each port: 
  ±200V （SMU ports
  ±100V （aux. ports）

• Maximum current through port to pins:
  ±1.6A （GNDU port）
  ±1A （SMU port）

HP4062UX Process Control System include the following：

Allwin21 Corp can provide the following refurbished sub-module separay.

＊ HP4085B Switching matrix

＊ HP 4084B Switching Matrix Controller

＊ HP 41421B Source/Monitor Unit

＊ HP 41420A Source/Monitor Unit （SMU）

＊ Main frames for HP4142B

There are 20 sets of refurbished  HP 4062 in stock,please refer the inventory information