示波器，電源，變頻電源，直流電源，頻譜分析儀，數字電橋LCR，臺式萬用表，安規測試儀;音頻測試儀，視頻制式測試儀，電子負載，電能質量分析儀，電參數測試儀，電池測試儀，熱成像儀，
泰克A622電流探頭?:規格Features & Benefits
A621
- AC – 5 Hz to 50 kHz
- 100 mA to 2000 A Peak
- For DMMs and Oscilloscopes
- Clamp On
泰克A622電流探頭?:參數
- AC/DC – 100 kHz
- 50 mA to 100 A Peak
- For DMMs and Oscilloscopes
Applications
- Motor Drives
- Inverters
- Power Supplies
- Avionics
A622
The A600 Series current probes high-value current probes are specifically designed to support measurements you make with your TekMeter® or oscilloscope*1.
A621 2000 AMP AC CURRENT PROBE/BNC
This industrial-style clamp-on probe has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can be used on digital multimeters, TekMeter, and scopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
A622 100 AMP AC/DC CURRENT PROBE/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can also be used on digital multimeters, TekMeter, and scopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
?:RECOMMENDED PRODUCTS
TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020*1, DMM4040*1, and DMM4050*1 digital multimeters.
*1 For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.
采購中心
化工儀器網