QQ交談
您所在位置：請輸入產品關鍵字：
郵編：102208
聯系人：付經理
電話：010-52571502
傳真：QQ：2459729122
手機：15910725349
留言：發送留言
網址：www.hedebio.com
商鋪：http://www.wanmeizu.com/st121773/
【產品簡介】
【詳細說明】
材料學PEEK拋光膏
新一代金屬拋光膏（拋光液），荷蘭品牌PEEK系列，四合一功效，帶給你不一般的感受！
金屬表面清潔、拋光、修復、防護，例如：黃銅brass，紫銅copper，不銹鋼，銀，金，鉻等等。不僅僅在金屬表面，在玻璃纖維，陶瓷，玻璃，丙烯酸樹脂，漆俱表面同樣發揮出色！
主要應用領域：
- 古玩、珠寶
- 轎車、卡車、輪船等
- 航空工業
- 航海領域
- 體育準備、浴室、廚房
材料學PEEK拋光膏產品信息：
貨號 | 產品名稱 | 規格 |
71833-10 | PEEK Polish 100 ml Tube Blister pk | 個 |
71833-11 | PEEK Polish 100 ml Tube Display Box | 個 |
71833-12 | PEEK Polish 250 ml Can | 個 |
71833-13 | PEEK Polish 1000 ml Can | 個 |
71833-14 | PEEK Polish 150 g Mousse (Foam) | 個 |
Brass… Peek® instantly restores brass to its original lustre. If Peek® does not instantly restore your brass this indicates it is lacquered. Lacquer may be removed with acetone or paint remover then polished with Peek®. A tough weather-shield is left after polishing.
Ho, Restaurant & Janitorial…Restore stainless steel sinks, countertops, water fountains, elevators and bathroom fixtures. Polish brass railings, beer taps, wall fixtures. Buff cloudiness from Perspex food guards; remove water stains from metals and glass. Shine cutlery, flat ware, chafing dishes and silver.
Kitchen… Peek® cleans and leaves a highly polished lustre on stainless steel sinks, copper, brass, bronze, silverware, and aluminium cookware. Removes stains, tarnish, and oxidation from all metals, enamel, Formica, silver, flatware, and serving pieces. Cleans ‘baked in’ marks from ceramic hobs.
Marine… Peek® removes tough stains from fibreglass, Perspex and glass. Eliminates tarnish, rust and oxidation from corroded aluminium, brass and stainless steel stanchions and fittings, bow rails, portholes and winches. After cleaning, Peek® leaves a tough weather-shield to protect against saltwater corrosion. Applies maximum lustre.
Sports Equipment… Peek® adds new life to trophies, golf clubs, bicycles, knives and firearms. Peek® is safe to use on factory gun bluing to remove powder residue. Restores fishing tackle, tack and camping equipment to original lustre while leaving a super-strong protection against the elements.
Tips:
1. Apply Peek® sparingly. Do not let dry. Rub briskly on surface to be cleaned, using a dry or damp cloth.
2. On large surface areas, Peek® may also be applied using a low-speed buffer (under 1000RPM).
3. On intricate surfaces, Peek® may be applied using an old toothbrush surrounded by your polishing cloth.
4. On minor rust or stubborn deposits, Peek® may be applied with a nylon scouring pad or #0000 brz/stl wool.
Caution:
If in doubt, always test Peek® on an inconspicuous area of the item that is to be cleaned, polished, and protected. Not suitable for anodised aluminium or lacquered surfaces. Peek® is NSF approved for safe use in and around food service areas.