QQ交談
您所在位置：請輸入產品關鍵字：
郵編：102208
聯系人：付經理
電話：010-52571502
傳真：QQ：2459729122
手機：15910725349
留言：發送留言
網址：www.hedebio.com
商鋪：http://www.wanmeizu.com/st121773/
冷鑲嵌樹脂（cold mounting and embedding resins）
- 發布日期：
- 有效日期：
- 所 在 地：
- 產 地：
- 已獲點擊：
- 2025年6月19日
- 2025年12月19日
- 北京北京市
- 德國
- 1408次
【產品簡介】
【詳細說明】
冷鑲嵌樹脂（cold mounting and embedding resins）
| Resin | Recommended Use | Specific Properties | Curing Time | Recommended Mounting Cup |
| EpoFix | Vacuum impregnation Porous & complicated specimens Mineralogical specimens | Transparent Epoxy Negligible curing heat Low viscosity Practically no shrinkage Excellent wetting and adhesion Peak temperature 43ºC | 8 hours at room temperature | Disposable Mold Cups （50480-10） |
| UniMount | Vacuum impregnation Porous specimens Mineralogical specimens Need more time to manipulating specimen | Transparent Epoxy Low viscosity Excellent penetration to cracks & pores No shrinkage Peak temperature 130ºC | 1½ - 2 hours at 70-80ºC | Disposable Mold Cups （50480-10） |
| AcryMount | Routine work Single or small series of specimens | Translucent Acrylic | 9 – 10 minutes at room temperature | Disposable Mold Cups （50480-10） Silicone Molds |
| PolyMount | Large series of uncomplicated specimens Used for specimens are not sensitive to heat. | Transparent Polyester Low viscosity Due to shrinkage, it’s recommended for specimens without holes or cavities. | 45 minutes at room temperature | Disposable Mold Cups （50480-10） Silicone Molds |
| PolyAcryMount | Edge retension Planeness Complicated specimens | Polyester/Acrylic Mineral filler White Peak temperature 114°C Excellent hardness Practically no shrinkage | 25 – 18 minutes | Disposable Mold Cups （50480-10） Silicone Molds |
| Epoxy-Dye | For use with EpoFix and Unimount | Fluorescent dye for use in microscopy to make cracks and pores visible. Special filters for microscopy | N/A | N/A |
| Acrylic-Dye | For use with Acrylmount | For color-coding specimens Color include blue, red & yellow | N/A | N/A |