您好, 歡迎來到化工儀器網
產品簡介
Quartz three-component dynamometer for measuring the three orthogonal components of a force. The dynamometer has a great rigidity and consequently a high natural frequency.
詳細介紹
: 李 :
瑞士奇石樂Kistler9257B三向測力儀
Quartz three-component dynamometer for measuring the three orthogonal componentsofaforce. Thedynamometer hasagreatrigidity andconsequentlyahighnaturalfrequency. Itshigh resolution enables the smallest dynamic changes in largeforcestobemeasured.
•Universalapplicable
•Forcuttingforcemeasurements
•Stableandreliable
Description
The dynamometerconsists of four three-componentforce sensors fitted under high preload betweenabaseplate and atopplate. Eachsensorcontains three pairsofquartz plates, onesensitivetopressure inthezdirectionandtheother two responding toshearin thex andy directionsrespectively.The forcecomponents aremeasuredpracticallywithout displace- ment.
Theoutputsofthe fourbuilt-inforcesensors areconnected insidethe dynamometerinaway to allowmulticomponent measurementsofforcesand momentstobeperformed. The eight outputsignalsare available at the 9-conductor flange socket.
The four sensors are mounted ground-insulated.Therefore ground loopproblemsarelargelyeliminated.
Thedynamometerisrustproof andprotectedagainstpenetra- tionofsplashwaterandcoolingagents.Togetherwiththecon- nectingcableType1687B5/1689B5andType1677A5/1679A5 itcorrespondstotheprotectionclassIP67.
Aspecial thermal isolation coating isintegratedinthe top plate which renders the dynamometerlargely insensitive to temperatureinfluences.
ApplicationExamples
•Dynamicandquasistaticmeasurementofthethreeorthogo- nalcomponentsofaforce
•Measuring cuttingforcewhenturning, milling,grindingetc. Inconjunction with the calibrated partial ranges the high sensitivityandlowthreshold allowexactmeasurementson smalltoolsandwhengrinding.
•Measurementsonscalemodelsinwindchannels
TechnicalData
| Range Fx,Fy,Fz FzforFxandFy≤0,5Fz Fz | kN kN | –5...51） –5...10 2） |
| Calibratedpartialrange1 Fx,Fy Fz | N N | 0...500 0...1000 |
| Calibratedpartialrange2 Fx,Fy Fz | N N | 0...50 0...100 |
| Overload Fx,Fy,Fz FzforFxandFy≤0,5Fz Fz | kN kN | –7,5/7,5 –7,5/15 |
| Threshold | N | <0,01 |
| Sensitivity Fx,Fy Fz | pC/N pC/N | ≈–7,5 ≈–3,7 |
| Linearity,allranges | %FSO | ≤±1 |
| Hysteresis,allranges | %FSO | ≤0,5 |
| Crosstalk | % | ≤±2 |
| Rigidity cx,cy cz | kN/μm kN/μm | >1 >2 |
| Naturalfrequency fn（x,y,z） | kHz | ≈3,54） |
| Naturalfrequency fn（x,y） （mounted onflanges） fn（z） | kHz kHz | ≈2,34） ≈3,54） |
| Operatingtemperaturerange | °C | 0...70 |
| Capacitance Fx,Fy,Fz | pF | ≈220 |
| Insulationresistance（20°C） | Ω | >1013 |
| Groundinsulation | Ω | >108 |
| Protection classEN60529 | – | IP673） |
| Weight | kg | 7,3 |
| Clampingarea mm | 100x170 | |
| Connection | Fischerflange, 9pol.neg. | |
1） Applicationofforceinsideandmax.25mmabovetopplatearea
2） Rangeforturning, application offorceatpointA
3） WithconnectingcableTypes1687B5,1689B5,1677A5, 1679A5
4） Without toolholderType9403