會員.png)
您所在位置：請輸入產品關鍵字：
郵編：200002
聯系人：程經理
電話：13282999420
傳真：
手機：
售后電話：13381759932
留言：發送留言
個性化：www.btgysh.com
網址：www.btgysh.com/
商鋪：http://www.wanmeizu.com/st176464/
100系列MAC美國
最近更新時間：2016-4-27
提 供 商：上海申思特自動化設備有限公司資料大小：134.1KB
文件類型：PDF 文件下載次數：98次
資料類型：未知文件瀏覽次數：447次
100系列MAC美國
MAC 100系列是一個直接的電磁三通閥閥。它采用短行程閥、平衡閥和強大的回位彈簧。這些特性轉化為高轉換的力量，快速一致的響應時間，和長壽命。我們*的平衡設計方法的通用性管道的閥門可以配置為3或2 -常閉或常開或可用于真空分流器，或選擇中的應用。有關認證（如UL、CSA、CE、ROHS、）請?jiān)L問我們的頁面得到支持。
100 Series
The MAC 100 Series is a direct solenoid operated 3-way poppet valve. It features a short stroke solenoid, a balanced poppet and powerful return spring. These features translate into high shifting forces, fast consistent response times, and long life. Our unique balanced design means versatility in piping - the valve can be configured as a 3-way or 2-way - normally closed or normally open or can be used for vacuum, diverter, or selector applications. For information regarding certifications (such as UL, CSA, RoHS, and CE) please visit the Get Support pages on our website.
•與非macsolenoid®燒壞的交流服務功能。
用一個單獨的閥門，六個閥門的功能。
•個人，堆體和add-a-unit流形的基礎能力。
使用潤滑油或非潤滑油服務。
極快速的反應和循環速率。
各種類型的手工操作和電氣附件。
超長使用壽命。
•可選低功率直流電磁鐵下降到1瓦特
• The patented MACSOLENOID® with its non-burn out feature on AC service.
• Six valve functions with one individual valve.
• Individual, stacking body & add-a-unit manifold base capability.
• Use on lube or non-lube service.
• Extremely rapid response and cycle rate.
• Various types of manual operators and electrical enclosures.
• Extremely long service life.
• Optional low wattage DC solenoids down to 1 watt
應用程序轉換程序：
單個模型
平衡閥的設計有利于使用該閥6功能與任何端口
被連接到真空，壓力或堵塞。管道在下面的圖表中顯示。
堆積體模型
閥門機構之間的互換功能板允許選擇
常閉或常開操作。
流形的基本模型
閥體與底座之間的可換功能板允許選擇
2或3路，常閉或常開操作。在三通的應用，一個
3路
常閉
2路
常閉
選擇器
3路
常開
2路
常開
偏濾器
功能板用于NC和NO當“3-NC”板上可見的
函數將北卡羅來納州當“3-no”是可見的，功能是泛指在雙向應用，
兩板是用一個北卡羅來納州，標有“2-nc”；其他為號，標記
“2-no”。路板塊的排氣閥，允許在一個混合的
對二3-ways和堆棧。從一個函數到另一個棧的變化可以是
不擾亂管道。
北卡羅來納州只有模型
一個單一的目的通常是封閉的模型是可用于這些應用中
對水、壓縮機產品和其他空氣的重濃度耐受性更大
線污染物。
APPLICATION CONVERSION PROCEDURE:
INDIVIDUAL MODELS
The balanced poppet design facilitates using the same valve for 6 functions with any port
being connected to vacuum, pressure or plugged. Piping is shown in the chart below.
STACKING BODY MODELS
The interchangeable function plate between the valve bodies permits selection of either
3-way Normally Closed or 3-way Normally Open operation.
MANIFOLD BASE MODELS
The interchangeable function plate between the valve bodies and base permits selection
for 2- or 3-way, Normally Closed or Normally Open operation. On 3-way applications, one
3 Way
Normally Closed
2 Way
Normally Closed
Selector
3 Way
Normally Open
2 Way
Normally Open
Divertor
function plate is used for both N.C. and N.O. When "3-NC" is visible on the plate, the
function will be N.C. When "3-NO" is visible, the function is N.O. On 2-way applications,
two separate plates are used-one for N.C., marked "2-NC"; the other for N.O., marked
"2-NO". The 2-way plates block the exhaust at the valve, permitting the mixing in a
stack of 3-ways and 2-ways. Changes within a stack from one function to another can be
made without disturbing the plumbing.
N.C. ONLY MODELS
A single purpose Normally Closed Only model is available for those applications where a
greater tolerance for heavy concentrations of water, compressor products and other air
line contaminants is desired.
我公司座落于上海市zui繁華全國各地幾乎人人皆曉的市中心，近外灘，人民廣場，南京東路步行街的相鄰之處，交通便利，路形易找；非常歡迎全國各地的廣大客戶前來我公司視察選購，上海威斯特公司一定會讓你買得放心，安心滿意，選購一次您一定會選購第二次；