聯系電話
上海堅融實業有限公司
中級會員·14年上海堅融實業有限公司
中級會員·14年聯系電話
當前位置：> 供求商機> DESCO 50569-ESK-1現場靜電測試套件ESD Survey Kit
掃一掃訪問手機商鋪
中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友(上海)測量儀器JETYOO INSTRUMENTS，專業為中國區用戶提供的儀器設備、技術培訓與售后維修服務，Support、銷售Sale、服務Service，3S公司，推出美國DESCO50569 ESK-1現場靜電測試套件ESD Survey Kit解決方案。
美國DESCO50569 ESK-1現場靜電測試套件ESD Survey Kit包含以下配置：
標準配置: 數量: 用途:
19492測試表 1個 測試靜電壓
19498電極板 1個 測試靜電消除器的離子平衡度和散電效果
19496高壓產生器 1個 產生+/-1000V以上電壓
19448電極板 1個 測試人體靜電位
19787測試表 1個 測試靜電電阻和溫濕度
50003重錘電極 2個 測試點到點電阻, 體積電阻, 接地電阻
19783連接線 2條 連接20780測試表和50003重錘電極
98131測試表 1個 測試手腕帶和電源插座是否合格
19245測試表 1個 測試接地電阻
手提箱 1個 所有以上物品放置在該箱內, 方便攜帶
ESD Survey Kit Operation and Maintenance Description
The Desco ESD Survey Kit is used for measuring, verifying, and qualifing products for used in the ESD Protected Area. The kit includes the following instruments:
Digital Surface Resistance Meter to measure resistance point-to-point (Rtt) or surface to ground (Rtg) in accordance with ESD Association Standard ANSI/ESD S4.1.
AC Outlet Analyzer to confirm that an outlet’s wiring is correct and the path to earth ground via the equipment grounding conductor (the green wire) is intact.
Low Resistance Tester to measure the resistance of grounding paths of banana jacks and other equipment.
Field Meter/Ionization Test Kit to measure static fields and to measure offset voltage (balance) and charge decay of ionization equipment.
Human Body Model Test Fixture to measure electrical charges generated on the human body while walking or moving across an insulative or conductive surface.
Training Paddle Set to demonstrate the creation of static charges and the functionality of ESD control products.
DESCO50569 ESD Survey Kit
Per ANSI/ESD S20.20 section 6.1.3.1 Compliance Verification Plan Requirement “A Compliance Verification Plan shall be established to ensure the organization’s compliance with the requirements of the Plan. Formal audits or certifications shall be conducted in accordance with a Compliance Verification Plan that identifies the requirements to be verified, and the frequency at which those verifications must occur. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan."
6.1.3.2. Compliance Verification Plan Guidance “In addition to internal audits, external audits (Organization and supplier of ESDS items) should be performed to ensure compliance with planned requirements. Verifications should include routine checks of the Technical Requirements in the Plan. The frequency of verification checks should be based on the control item usage, its durability and associated risk of failure."
This clearly states the necessity of having the means to perform regular surveys at your facility. The ESD Survey Kit will enable you to do this.
The ESD Program Standard ANSI/ESD S20.20-2007
上海堅融實業有限公司 - 主營產品： 國產數字源表,國產高阻表
化工儀器網設計制作，未經允許翻錄必究 Copyright(C) http://www.wanmeizu.com All rights reserved
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。請輸入賬號
請輸入密碼
請輸驗證碼
