首頁 >> 供求商機
張力儀是測量絲網受到拉力作用時其內部與固定絲網接觸體之間的相互牽引力大小的儀器。張力儀有機械式和電子式兩種，測量張力的單位用牛頓/厘米表示。張力也可以用相對數值來表示。厘米張力儀就是用相對數值表示張力的一種，是通過張力儀自身重量使絲網下沉的深度的數值(毫米)來計算，張力數值可從指示盤上直接得到，或者從控制盤上間接得到。張力儀有手工操作和機械操作兩種。張力儀是檢驗絲網印版質量的重要的檢測儀器。為保證得到制版要求的張力，在繃網過程中或繃網后都要使用張力儀測量。
德國Honigmann專注于卷材張力檢測和張力控制有超過60年歷史，是大張力測量儀表生產商。旗下產品有皮帶張力計136-3E適用于的長繩，電纜，栓繩，凱芙蘭和玻璃纖維材料的張力測量。
5 Ranges, up 1000lbs / 500 Kg / 5000N
Honigmann 136-3E For Wire Diameters up to 0.590" / 15mm
Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) such as guy wires, support cables, tethers and more. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in a similar applications.
The 136-3E employs a unique roller configuration and measurement scheme to minimize the deflection of the wire/cable. The total wrap angle of the material over the center sensing roller is 3 degrees eliminating all measurement errors!
No other company or product in the world can make this claim!
The material threading pattern (refer to illustration below) insures easy material acquisition and good tactile feedback allowing for excellent repeatability between measurements as well as between different users.
Precision ball-bearing rollers are used to eliminate any error caused by friction. These rollers are mounted on a large mounting plate properly spaced to remove the negative influence normally caused by the inherent rigidity of wires and cable up to 15 mm in diameter (0.590").
Minimal material deflection eliminates measurement errors
Wear-resistant, ball-bearing guide rollers eliminate errors caused by friction
Built-in material diameter compensation for error-free measurements of samples up to 15 mm (0.590")
Splashproof version of sensor & indicator is offered for use in wet environments (in rain or near splashing water)
Accuracy | ± 1.5% Full Scale or better |
Outer Roller Spacing (c:c) | 370 mm |
Wrap Angle | 3 Degrees |
Additional Length Effect | 0.12 mm |
Mechanical Diameter Compensation | up to 15 mm, max |
Guide Rollers | V-Grooved, 47/21 mm (OD/Root Diameter) |
Roller Material | Aluminum with Hardcoat Anodize (Hardened Steel, optional) |
Overload Protection | 200% + |
Calibration Certificate | Optional |
訂貨型號
Model | Range |
1363E-10LB-V | 0-10 Lb |
1363E-100LB-V | 0-100 |
1363E-200LB-V | 0-200 Lb |
1363E-500LB-V | 0-500 Lb |
1363E-1000LB-V | 0-1000 Lb |
相關型號
D-485
3