您好, 歡迎來到化工儀器網
產品簡介
詳細介紹
THS series is a non-contact thickness/height/depth measuring system based on an optical type focal point detection method, incorporating the two microscope optical systems of the top and bottom, with precise focus indicator using index graticule. Thickness can be measured up to 10mm with observing the surface of measuring point. Because of an optical system, operations are simple, and the precise focus indicator (Target Mark) can be seen on a monitor at a just focus condition.
Z-axis movement of top and bottom optical systems are operated manually, and thickness measurements are performed on a monitor screen. Measurement resolution is 1μm as standard, and 0.1μm as option.
THS-20 is an automatic system combining auto focus and pulse stage.X, Y or Z coordinate position, pitch feed, etc. by pulse motor drive are measured in sequential operation. Adopting image processing auto focus, high-reliable repeatability is achieved without individual differences. Also incorporating leading-edge technology, user-friendliness has been improved by Windows' base user interface.
Specifications
THS-10
Measuring area X:100mm Y:100mm
Resolution 1μm(0.1μm option)
Stage Manual traveling, X,Y reading by linear scale, Min 1μm reading
THS-20
Measuring area X:100mm Y:100mm
Measuring time 6 - 8 sec/point
Resolution 0.1μm
Repeatability 1σ=0.5μm(testing block gauge)
Stage Travel by pulse motor, move to coordinate position, pitch feed movement available, 4 kinds of modes available