聯系電話
上海故得自動化設備有限公司
中級會員·10年上海故得自動化設備有限公司
中級會員·10年聯系電話
當前位置：> 供求商機> burkert A 3.0 FKM MS 24V DC 00126091
掃一掃訪問手機商鋪
burkert A 3.0 FKM MS 24V DC 00126091和burkert 00125309電磁閥是burkert 6013的訂貨號，寶德電磁閥126091介質壓力為0-6bar，寶帝電磁閥6013-126091連接方式為G螺紋，寶德6013 A 3.0 FPM是標簽上的一些參數。
burkert A 3.0 FKM MS 24V DC 00126091材質：
技術參數：
Body material
Type 6013
Type 6013 A
Brass, stainless steel 1.4305
Brass, stainless steel 1.4305
Seal material FKM, PTFE/Graphite (EPDM on request)
Analysis version
Type 6013 A
Silicon, oil and fat free version
Tightness <10-4 mbar l/s
Limit value for risidual carbon
Type 6013 A <0.2 mg/dm²
Medium
Type 6013
Type 6013 A
• Technical vacuum
• Neutral gases and liquids
(e.g. compressed air, water, hydraulic oil)
• Neutral medium, which does not attack the body
and seal materials (see chemical resistance chart)
Medium temperature
FKM
PTFE/Graphite
FKM, Circuit function B
-10 to +100 °C (PA coil) till 120ºC (Epoxy coil)
-40 to +180 °C (see chemical resistance chart)
-10 to 100°C (AC) -10 to 120°C (DC)
Ambient temperature Max. +55 °C
Viscosity Max. 21 mm²/s
Port connection
Type 6013
Type 6013 A
G1/8, G1/4, G3/8, sub-base (SFB)
G1/8, G1/4
Operating voltage
Type 6013
Type 6013 A
24 V DC, 24 V/50 Hz, 230 V / 50 Hz
24 V DC, 230 V / 50 Hz (other voltages on request)
Voltage tolerance ± 10%
Duty cycle/single valve
With block assembly on manifold
* continuous rating
Intermittent operation 60% (30 min) or with 5 W coil on
request
Electrical connection
Tag connector acc. to DIN EN 175301-803 Form A
(previously DIN 43650) for cable plug Type 2508
(see accessories)
ATEX/IECEx version with 3 m moulded cable
Installation As required, preferably with actuator upright
Assembly No oils, fats or silicone to be used during installation
Protection class IP65 with cable plug, ATEX/IECEx junction box version
and cable connection version
上海故得自動化設備有限公司 - 主營產品： CONVO變頻器,康沃變頻器,寶德比例調節閥,burkert ...
化工儀器網設計制作，未經允許翻錄必究 Copyright(C) http://www.wanmeizu.com All rights reserved
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。請輸入賬號
請輸入密碼
請輸驗證碼
