OMB-DAQ-2416數據記錄儀 美國omega, 一手貨源,優勢批發,精度高,是優質的記錄儀表,據記錄儀記錄多層電路板的溫度.作為ISO9000質量控制項目的一部分,熱電偶（相當細的電線）裝在電路板層之間.之后,如果報告任何質量問題,他們就可以瀏覽這些歷史數據作為調查內容. 　　記錄儀記錄葡萄酒

 

OMB-DAQ-2416數據記錄儀 美國omega

高性能USB多功能I/O數據采集模
OMB-DAQ-2416
1年保修 新產品! CE OmegaCare
多通道數據采集
OMB-DAQ-2416:高性能的多功能I / O USB數據采集模塊
OMB-DAQ-2416
16分或32個單端模擬輸入，可擴展到32個微分/ 64單端通道
24位分辨率
熱電偶或電壓輸入
九軟件可選的電壓范圍：±20V 10V，±，±5V，±2.5V，±1.25V，±0.625v，±0.312v，±0.156v，和±0.078v
模擬輸入可配置為熱電偶（zui多16個差分輸入）
1000樣本/秒的總吞吐量
內置的冷端補償和開放的熱電偶檢測
八行高驅動數字I / O
兩個32位計數器
500V之間的隔離信號的I / O和主機
omb-daq-2416-4ao還包括4個模擬輸出
The OMB-DAQ-2416 and the OMB-DAQ-2416-4AO are highly accurate, multi-function measurement and control modules for the USB bus. These modules are 24-bit analog input devices for voltage or temperature, with eight digital I/O lines and two counters. In addition to the features listed, the OMB-DAQ-2416-4AO also includes four analog output channels with 16-bit resolution, ±10V output range, and an aggregate 1000 Hz update rate.
System Expansion
With the addition of an optional OMB-AI-EXP32 analog input expansion module, the number of analog input channels on the OMB-DAQ-2416 or OMB-DAQ-2416-4AO can be doubled—increasing from 16 differential/32 single-ended inputs, to 32 differential/64 single-ended inputs. The expansion module also provides an additional 16 channels of DIO, bringing the total DIO count of the mated pair to 24.
All features of the OMB-DAQ-2416 series module are included when the OMB-AI-EXP32 is attached, including the ability to accommodate thermocouples on any input channel, built-in cold junction compensation, and open thermocouple detection. The OMB-AI-EXP32 can be plugged directly into a OMB-DAQ-2416 series module. The packaging for the OMB-DAQ-2416 series and the OMB-AI-EXP32 ensures ease of use in a variety of applications. Detachable screw terminals facilitate attaching and removing without re-wiring. The modules can easily be DIN-rail mounted for rack applications.
Software
The OMB-DAQ-2416 modules ship with an impressive array of software, including the new TracerDAQ?, a full-featured, out-of-the-box data logging, viewing, and analysis application. Driver support and detailed example programs are included for Universal Library programming libraries for Microsoft? Visual Studio? programming languages, and other languages, including DASYLab?, and ULx for NI LabVIEW? (comprehensive library of VIs and example programs compatible with 32-bit and 64-bit LabVIEW v8.5 through 2012) and InstaCalTM installation, calibration and test utility-powerful solutions for programmers and nonprogrammers alike. These modules operate under Microsoft Windows? XP (32-bit only) and VISTA/7/8 (32-bit and 64-bit) operating systems.
The OMB-DAQ-2416 Series data acquisition modules are supplied with TracerDAQ software which is a collection of four virtual instrument applications used to graphically display and store input data and generate output signals:
Strip Chart—Log and graph values acquire from analog inputs, digital inputs, temperature inputs and counter inputs
Oscilloscope—Display values acquired from analog inputs
Function Generator—Generate waveforms for analog outputs
Rate Generator—Generate waveforms for counter outputs
TracerDAQ PRO is an enhanced version of TracerDAQ. A comparison of some of the features included in TracerDAQ vs TracerDAQ PRO is shown below.
規格
A/D CONVERTER
(OMB-DAQ-2416, OMB-DAQ-2416-4AO)
A/D Converter Type: 24-bit sigma delta
A/D Data Rates:3750 samples/sec (S/s), 2000 S/s, 1000 S/s, 500 S/s, 100 S/s, 60 S/s, 50 S/s, 25 S/s, 10 S/s, 5 S/s, 2.5 S/s
Input Isolation: 500 Vdc min between field wiring and USB interface
Common Mode Rejection: Thermocouple mode, 110 dB; voltage mode, 90 dB
ANALOG INPUTS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32)
Number of Channels: 16 differential/32 single-ended (thermocouples require differential mode) on OMB-DAQ-2416 or OMB-DAQ-2416-4AO. The OMB-AI-EXP32 is a multiplexer-based channel expansion module that adds an additional 16 differential/32 single ended channels.
Maximum Input Voltage: ±30V (power on), ±10V (power off)
Input Impedance: 2 GΩ (power on), 390 Ω (power off)
Input Leakage Current: ±10.6 nA (OMB-DAQ-2416, OMB-DAQ-2416-AO); ±20 nA (OMB-AI-EXP32); ±1μA max for input voltage >±30 V
Input Capacitance: 590 pF
Crosstalk: 100 dB adjacent channels
Channel Gain Queue: Up to 64 elements, software configurable channel and range
Warm-Up Time: 45 minutes max (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 15 minutes max (OMB-AI-EXP32)
Open Thermocouple Detect: Automatically enable when a channel is configured for a thermocouple sensor.
CJC Sensor Accuracy: ±0.15°C typical (15 to 35°C); ±0.5°C max (0 to 55°C)
ANALOG OUTPUT
(OMB-DAQ-2416-4AO ONLY)
Number of Channels: 4
Resolution: 16-bit
Range: ±10 Vdc
Absolute Accuracy: ±16.0 LSB
Relative Accuracy: ±4.0 LSB
Differential Non-Linearity: ±0.25 LSB typical; ±1 LSB max
Current: ±3.5 mA max
Power On and Reset State: DACs cleared to zero scale, 0V ± 50 mV
Noise: 30 μVRMS
Settling Time: 45 μs
Slew Rate: 1.0 V/μs
Throughput: Single channel, 1000 S/s (max, system dependent); multiple channels, 1000 S/s divided by the number of channels (max, system dependent)
ANALOG INPUT/OUTPUT
CALIBRATION
Recommended Warm-Up Time: 45 minutes max
Calibration: Firmware calibration
Calibration Interval: 1 year
Calibration Reference: 10.000V, ±5 mV max; actual measured values stored in EEPROM
Tempco: 5 ppm/°C max
Long Term Stability: 30 ppm/1000 hrs
DIGITAL INPUTS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32)
Number of Digital I/O
Channels: 8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32)
Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated.
Voltage Range: 0 to 15 Vdc
Type: CMOS (Schmitt trigger)
Characteristics: 47 kΩ pull-up/pulldown resistor, 28 kΩ series resistor
Maximum Input Voltage Range: 0 to 20 Vdc max (power on/off, relative to DGND)
Pull-Up/Pull-Down Configuration: All pins pulled up to 5V via individual 47 kΩ resistors (default configuration); pull-down capability is available by moving internal jumper
Transfer Rate (Software Paced): 500 port reads or single bit reads per second typical
Input High Voltage: 1.3V min, 2.2V max
Input Low Voltage: 1.5V max, 0.6V min
Schmitt Trigger Hysteresis: 0.4V min, 1.2V max
DIGITAL OUTPUTS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32)
Number of Digital I/O Channels:
8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32)
Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated.
Characteristics: 47 kΩ pull-up, open drain DMOS transistor
Pull-Up Configuration: All pins pulled up to 5V via individual 47 kΩ resistors by default
Transfer Rate (Software Paced): 500 port writes or single bit writes per second typical
Output Voltage Range: 0 to 5V (no external pull-up resistor, internal 47 kΩ resistors connected to 5V by default); 0 to 15V max
Drain to Source Breakdown Voltage: 50V min
Off-State Leakage Current: 0.1 μA
Sink Current Capability: 150 mA max continuous per output pin; 150 mA max continuous for all eight channels
DMOS Transistor On-Resistance (Drain to Source): 4 Ω
COUNTERS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO)
Number of Channels: 2
Resolution: 32-bit
Counter Type: Event counter
Input Type: Schmitt trigger, rising edge triggered
Counter Read/Write Rates (Software Paced): 500 reads or writes per second (system dependent)
Input Characteristics: 562 kΩ pull-up resistor to 5V, 10 kΩ series resistor
Input Voltage Range: ±15V max
Maximum Input Voltage Range: ±20V max (power on/off)
Input High Voltage: 1.3V min, 2.2V max
Input Low Voltage: 1.5V max, 0.6V min
Schmitt Trigger Hysteresis: 0.4 min, 1.2V max
Input Bandwith (-3dB): 1 MHz
Input Capacitance: 25 pf
Input Leakage Current: ±120 nA
Input Frequency: 1 MHz max
High Pulse Width: 500 ns min
Low Pulse Width: 500 ns min
GENERAL
OMB-DAQ-2416, OMB-DAQ-2416-4AO
DATA ACQUISITION MODULES
Memory: EEPROM
Microcontroller: One high-performance 8-bit RISC microcontroller with USB interface (non-isolated); one high-performance 16-bit RISC microcontroller for measurements (isolated)
Power: 5V ±5%, 340 mA supplied by included AC adaptor (OMB-DAQ-2416-ADAP)
User Output Voltage: 5V, 10 mA max available (pin 35)
Isolation: 500 Vdc min measurement system to PC
USB Device Type: USB 2.0 (full-speed)
Device Compatibility: USB 1.1, USB 2.0
USB Cable Length: 5 m (16') max
Dimensions: 245 L x 146 W x 50 mm H (9.6 x 5.7 x 2.0")
Input Connections: Detachable screw terminal blocks (accept 16 to 30 AWG wire)
Operating Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH non-condensing
Storage Temperature: -40 to 85°C (-40 to 185°F)
Weight: 463 g (16.3 oz)
OMB-AI-EXP32
EXPANSION MODULE
User Output Voltage:
+5 V, 10 mA max available (pin 19)
Dimensions: 245 L x 146 W x 50 mm H (9.6 x 5.7 x 2.0")
Input Connections: Detachable screw terminal blocks (accept 16 to 30 AWG wire)
Operating Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH non-condensing
Storage Temperature: -40 to 85°C (-40 to 185°F)
Weight: 400 g (14.1 oz)

產品型號 產品描述
OMB-DAQ-2416 Multi-function I/O USB data acquisition module
OMB-DAQ-2416-4AO Multi-function I/O USB data acquisition module with 4 analog outputs
Expansion Module
OMB-AI-EXP32 Expansion module with frequency measurement and digital I/O
選配件
OMB-DAQ-2416-ADAP Spare USA AC adaptor
OMB-DAQ-2416-PL-AU Spare Australian plug for AC adaptor
OMB-DAQ-2416-PL-EU Spare European plug for AC adaptor
OMB-DAQ-2416-PL-UK Spare UK plug for AC adaptor
OMB-CA-179-1 Spare USB cable, 1 m (3.2')
OMB-CA-179-3 USB cable, 3 m (9.8')
OMB-CA-179-5 USB cable, 5 m (16.4')
OMB-ACC-202 DIN rail adaptor kit for OMB-DAQ-2416 Series
OMB-ACC-216 Spare detachable screw terminal kit (set of 6 screw terminal blocks) for OMB-DAQ-2416 and OMB-DAQ-2416-4AO
SWD-TRACERDAQ-PRO TracerDAQ Pro software

OMB-DAQ-2416數據記錄儀 美國omega

衍生閱讀:。而無線溫濕度記錄儀也使在某一區域內的多點溫濕度記錄和管理成為可能。 溫度記錄儀 溫度記錄儀 (18張) 由于在某些場合根據規定必須使用有紙溫度記錄儀，比如：醫療上用的高溫殺菌鍋、低溫冷藏、用于出口的食品生產等；以及有紙溫度記錄儀無須電腦知識而適用于一些低知識水準員工操作場合的管理和控制，有紙溫度記錄儀一時還無法被無紙記錄儀*替代。 類型編輯 分類： 按記錄媒介分：有紙溫度記錄儀 無紙溫度記錄儀；其中有紙溫度記錄儀又分為：長圖溫度記錄儀、圓 　　圖溫度記錄儀 　　按通道分：單通道溫度記錄儀 雙通道溫度記錄儀 多通道溫度記錄儀 依據記錄和存儲方式 名稱 記錄存儲方式 特點 典型圖片 有紙溫度記錄儀 機械式 通過機械記錄筆在記錄紙上繪制曲線，從而達到記錄并保存數據的目的。 記錄紙保存數據。 有紙溫度記錄儀 有紙溫度記錄儀 無紙溫度記錄儀 電子式 采用微處理器、顯示屏和存儲器。是所有電子類溫度記錄儀的zui早稱謂或統稱。 存儲
相關產品：

美國omega OM-CP-AVS150-5-CERT采集器